NEW

Ball Valve 3" BSP

Designed and made in New Zealand TRUDESIGN™ Certified Ball Valves are specifically designed for use in marine applications above and below the water line.

• Certified to ISO 9093:2021 by the International Marine Certification Institute (IMCI, Belgium) when fitted to TRUDESIGN Skin Fittings (Thru Hulls)
• Comply with ABYC H-27 standards when used in conjunction with TruDesign Skin Fittings (Thru Hulls)

 Manufactured from a glass-reinforced Nylon composite – High strength, tough and light weight – The Ball Valve weighs less than 1.5Kg (7.7 Lbs).
 Immune to corrosion & electrolysis – increased safety.
 The Ball Valve can be locked in the closed position.
 Electrically non-conductive. No electrical bonding.
 Suitable for use on all hull types - aluminium, steel, wood, or GRP.
 The ball and sealing rings utilise a PTFE polymer to ensure smooth action and minimal fouling.
 Large operating range – Suitable for all marine conditions from -40°C to +110°C
 BSP Thread
 U.V resistant – No degradation from the sun’s ultraviolet rays.
100% leak tested before leaving factory.

Do TruDesign Ball Valves require lubrication ?

Question

Do TruDesign Ball Valves require lubrication ?

Answer

No. The TruDesign ball valves are manufactured with a Teflon impregnated Ball running on Teflon rings, so no lubrication is required. It is good practice to turn the valve handle every few months...

What sealant can I use on TruDesign threads ?

Question

What sealant can I use on TruDesign threads ?

Answer

TruDesign recommends the following sealants: Adhesive Thread Sealants: - Sikaflex 291i - Sikaflex 591 - 3M 5200 - 3M 5200FC (fast cure) - Bostik 920 Normal Sealants: - Loctite 5331 -...

Can I remove the handle from a TruDesign Ball Valve?

Question

Can I remove the handle from a TruDesign Ball Valve?

Answer

Yes, To aid installation in confined spaces it may be useful to remove the handle from the Ball Valve. To do so follow the steps below: - Remove the flush screw cover from the top of the handle...